Surgical masks have been a kind of commodity in shortage due to the widespread of 2019-nCoV. There are organizations planning to initiate or expand the production in short time. Surgical masks are classified as medical devices in certain countries with applicable regulations.
As reference information to manufacturers, hereinafter we will make an simple introduction on the FDA Prematket Notification for Surgical Masks to US market, with scope limited to FXX Surgical Mask and MSH Surgical N95 NIOSH certified Respirator described in 21 CFR §878.4040(b) class II.
When submitting the Premarket Notification by a manufacturer, FDA suggests following information to be included in an abbreviated 510(k) submission:
The coversheet should prominently identify the submission as an Abbreviated 510(k).
The labelling should clearly state the intended use. It should also describe the indications for use, such as whether the mask is an isolation mask, procedure mask, or dental face mask. It’s also recommended to state whether your device is intended to be a reusable device or a single use disposable device.
For a Class 3 flammability surgical mask, it’s recommended to include a flammability warning.
FDA recommends that the summary report contains a:
a) Description of the device.
FDA recommends to identify the device by regulation and product code and compare the device with the predicate device using a tabular format as shown below.
|Description||Your Device||Predicate (with 510(k) number, if available)|
|Specifications and Dimensions|
|NIOSH certification number (when available)|
You should also submit an “indications for use” enclosure.
b) Description of device design requirements.
c) Identification of the risk analysis methods used to assess the risk profile as well as the specific device’s design and the results of this analysis.
d) Discussion of the device characteristics that address the risks identified by FDA:
- inadequate fluid resistance,
- inadequate barrier for bacteria,
- inadequate air exchange (differential pressure),
- inadequate respiratory barrier for bacteria,
- additional risks identified in the risk analysis.
e) Brief description of the test methods to address each of the following performance aspects:
|Performance Aspects||Suggested Standard Test Methods|
|Fluid Resistance||· ASTM F 1862|
|Particulate Filtration Efficiency||· ASTM F 1215-89|
|Bacterial Filtration Efficiency||· Mil- M369454C
· Modified Greene and Vesley Method: Method for evaluation of bacterial filtration efficiency of surgical masks. J Bacteriol 83:663-667. (1962)
· ASTM F2101-01
|Differential Pressure (Delta-P) Test||· MIL-M-36945C 22.214.171.124.1 Method 1 Military Specifications: Surgical Mask, disposable (June 12, 1975)|
|Flammability Testing||· CPSC CS-191-53 Flammability Test Method (16 CFR 1610)
· NFPA Standard 702-1980
· UL 2154
FDA may request additional information about aspects of the device’s performance characteristics or information to assess the adequacy of the acceptance criteria.
For the surgical masks to US market, the associated manufactures are required to comply with the Quality System Regulations (21 CFR Part 820), which is quite similar with ISO 13485. For those to some other countries, the manufactures are required or recommended to implement a Quality Management System (QMS) based on ISO 13485 or equivalent standard.
Service by DQS
DQS is a certification body for ISO 13485:2016, a Notification Body for medical devices and CE marking, and an Audit Organization (AO) providing MDSAP audits.
Contact us for the service you need.
Referenced Source: Guidance Document by FDA.